Show Ip Igmp Interface - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
show ip igmp groups port info [ vlan vlan-id ]
Parameter
vlan-id —— Specify the VLAN ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the layer 2 forwarding ports of all the dynamic
multicast groups:
T3700G-28TQ(config)# show ip igmp groups port-info
show ip igmp interface
Description
The show ip igmp interface command is used to display the IGMP
configuration information on the specified port.
Syntax
show ip igmp interface { fastEthernet | gigabitEthernet | ten-gigabitEthernet }
port [ detail | statistic | max-groups ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— Specify the port type.
port —— Specify the port number.
detail —— The detailed information of the IGMP configuration on the specified
port.
statistic —— The IGMP packet statistics received on the specified port.
max-groups —— The maximum number of the multicast groups on the specified
port.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the statistics of the IGMP packets received on the gigabitEthernet 1/0/1:
T3700G-28TQ(config)# show ip igmp interface gigabitEthernet 1/0/1 statistic
318
Advertisement
Table of Contents
