Preface - TP-Link TL-SG3210 Cli Reference Manual

Preface

This Guide is intended for network administrator to provide referenced information about CLI
(Command Line Interface). The switch or TL-SG3210/TL-SG3216/TL-SG3424 mentioned in this
Guide stands for TL-SG3210/TL-SG3216/TL-SG3424 JetStream L2 Managed Switch without any
explanation.
The three devices of TL-SG3210, TL-SG3216 and TL-SG3424 are sharing this Guide. For
simplicity, we will take TL-SG3424 for example throughout this Guide. TL-SG3210, TL-SG3216
and TL-SG3424 just differ in the number of LED indicators and ports and all figures in this guide
are of TL-SG3424.
Overview of this Guide
Chapter 1: Using the CLI
Provide information about how to use the CLI, CLI Command Modes, Security Levels and some
Conventions.
Chapter 2: User Interface
Provide information about the commands used to switch between five CLI Command Modes.
Chapter 3: IEEE 802.1Q VLAN Commands
Provide information about the commands used for configuring IEEE 802.1Q VLAN.
Chapter 4: MAC-Based VLAN Commands
Provide information about the commands used for configuring MAC-Based VLAN.
Chapter 5: Protocol-Based VLAN Commands
Provide information about the commands used for configuring Protocol-Based VLAN.
Chapter 6: Voice VLAN Commands
Provide information about the commands used for configuring Voice VLAN.
Chapter 7: GVRP Commands
Provide information about the commands used for configuring GVRP (GARP VLAN registration
protocol).
Chapter 8: Etherchannel Commands
Provide information about the commands used for configuring LAG (Link Aggregation Group) and
LACP (Link Aggregation Control Protocol).
Chapter 9: User Manage Commands
Provide information about the commands used for user management.
Chapter 10: Binding Table Commands
Provide information about the commands used for binding the IP address, MAC address, VLAN
and the connected Port number of the Host together. Besides it also provide information about the
1