Auto-Summary; Default-Metric - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Router Configuration Mode (router rip)
Example
Configure the administrative distance of RIP as 20:
T3700G-28TQ(config)# router rip
T3700G-28TQ(config-router)# distance 20
auto-summary
Description
The auto-summary command is used to enable the Auto Summary mode for
RIPv2. In Auto Summary mode, groups of adjacent routes will be summarized
into single entries, in order to reduce the total number of entries. To disable the
Auto Summary mode, please use no auto-summary command.
Syntax
auto-summary
no auto-summary
Command Mode
Router Configuration Mode (router rip)
Example
Configure the RIP version as RIPv2 and disable its Auto Summary mode:
T3700G-28TQ(config)# router rip
T3700G-28TQ(config-router)# version 2
T3700G-28TQ(config-router)# no auto-summary
default-metric
Description
The default-metric command is used to configure the default metric of
redistributed routes. If a router runs RIP and other routing protocols, you can
configure RIP to redistribute external routes. To return to the default
configuration, please use no default-metric command.
345
Advertisement
Table of Contents
