Show Cluster Ntdp; Show Cluster - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
show cluster ntdp
Description
The show cluster ntdp command is used to display NTDP configuration
information.
Syntax
show cluster ntdp [ interface [fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ] | device-list { detail | summary } ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number. By default, the
configuration of all Fast / Gigabit/Ten-Gigabit Ethernet ports is displayed.
device-list —— To display the device table of NTDP.
detail —— The detailed information of the device-list.
summary —— The device-list information in summary.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global information of NTDP:
T3700G-28TQ#show cluster ntdp
Display the NTDP configuration of Gigabit Ethernet port 1/0/2:
T3700G-28TQ#show cluster ntdp interface gigabitEthernet 1/0/2
Display the device table of NTDP in summary:
T3700G-28TQ#show cluster ntdp device-list summary
show cluster
Description
When the current switch is Commander Switch, the show cluster command is
used to display the global configuration of Cluster.
Syntax
show cluster
Command Mode
Privileged EXEC Mode and Any Configuration Mode
275
Advertisement
Table of Contents
