T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
ip ospf cost
Description
The ip ospf cost is used to configure the interface cost. To restore to the default
value, please use the no ip ospf cost command.
Syntax
ip ospf cost cost
no ip ospf cost
Parameter
cost —— The interface cost, ranging from 1 to 65535. The default value is
calculated according to the bandwidth.
Command Mode
Interface Configuration Mode
Example
Configure the cost of interface VLAN 2 as 10:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip ospf cost 10
ip ospf retransmit-interval
Description
The ip ospf retransmit-interval command is used to configure the interval to
retransmit the LSA, DD and LSR packets on the specified interface. To restore
to default value, please use the no ip ospf retransmit-interval command.
Syntax
ip ospf retransmit-interval interval
no ip ospf retransmit-interval
Parameter
interval—— The retransmit interval, ranging from 1 to 65535 seconds. The
default value is 5 seconds.
373