Cluster Candidate; Cluster Individual - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
no cluster member {mac-address mac-address}
Parameter
mac-address —— The MAC address of the member switch desired to join in or
to be deleted from the cluster.
Command Mode
Global Configuration Mode
Example
Add the switch whose MAC address is 0e:3f:4g:5e:6d:7b to the cluster:
T3700G-28TQ(config)#cluster member mac address 0e:3f:4g:5e:6d:7b

cluster candidate

Description
The cluster candidate command is used to specify the current switch as
candidate switch. This command is invalid for the member switch in the cluster.
Syntax
cluster candidate
Command Mode
Global Configuration Mode
Example
Specify the current switch as candidate switch:
T3700G-28TQ(config)#cluster candidate

cluster individual

Description
The cluster individual command is used to specify the current switch as
individual switch.
Syntax
cluster individual
Command Mode
Global Configuration Mode
Example
Specify the current switch as individual switch:
272