T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
no ip rip split-horizon
Command Mode
Interface Configuration Mode
Example
Enable split horizon function on the interface VLAN2:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip rip split-horizon
show ip rip
Description
The show ip rip command is used to display the RIP configurations.
Syntax
show ip rip [ interface | database [ specify ip-address mask ] ]
Parameter
interface —— Display the RIP interface basic information.
database —— Display the RIP routing table. To display the routing information
of a specified RIP interface, please specify its IP address and subnet mask.
ip-address —— The IP address of which you desire to show the routing
information.
mask — — The subnet mask of which you desire to show the routing
information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the RIP routing information of the network 192.168.1.0/24:
T3700G-28TQ(config)# show ip rip database specify 192.168.1.0
255.255.255.0
351