Lldp Med-Location - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Exclude "network policy" and "inventory" TLVs in LLDPDU outgoing from port
1/0/2:
T3700G-28TQ(config)# interface gigabitEthernet 1/0/2
T3700G-28TQ(config-if)# no lldp med-tlv-select network-policy inventory-
management

lldp med-location

Description
The lldp med-location command is used to configure the Location Identification
TLV's content in outgoing LLDPDU of the port.
Syntax
lldp med-location { emergency-number identifier | civic-address [ [ language
language ] [ province-state province-state ] [ county county] [city city ] [ street
street ] [ house-number house-number ] [name name ] [ postal-zipcode
postal-zipcode ] [ room-number room-number ] [ post-office-box post-office-box ]
[ additional additional ] [ country-code country-code ] [ what { dhcp-server |
endpoint | switch } ] ] }
Parameter
emergency-number —— Emergency Call Service ELIN identifier, which is used
during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP.
The length of this field ranges from 10 to 25 characters.
civic-address —— The civic address is defined to reuse the relevant sub-fields
of the DHCP option for civic Address based Location Configuration Information
as specified by IETF.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
263