Vrrp Vrid Preempt-Mode - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
vrrp vrid vrid timer-advertise adver-interval
no vrrp vrid vrid timer-advertise
Parameter
vrid —— The virtual router ID.
adver-interval —— Advertisement interval, ranging from 1 to 255 in seconds. By
default, it's 1 second.
Command Mode
Interface Configuration Mode
Example
Configure the advertisement interval for the interface VLAN 3 as 12 seconds in
vrid 4:
T3700G-28TQ(config)#interface vlan 3
T3700G-28TQ(config-if)#vrrp vrid 4 timer-advertise 12

vrrp vrid preempt-mode

Description
This command sets the preemption mode and the delay time for the virtual
router configured on a specified interface. To set non-preempt mode for the
virtual router configured on a specified interface, please use no vrrp vrid
preempt-mode command. The virtual router is in non-preempt mode by default.
Syntax
vrrp vrid vrid preempt-mode [ timer-delay delay-value ]
no vrrp vrid vrid preempt-mode
Parameter
vrid —— The virtual router ID.
delay-value —— The time that a backup router has to wait for before setting
itself as the master when the current master is considered to be unavailable. It
ranges from 0 to 255 in seconds. By default, it's 0.
Command Mode
Interface Configuration Mode
337