Rmon Event - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

rmon event

Description
The rmon event command is used to configure the entries of SNMP-RMON
Event. To return to the default configuration, please use no rmon event
command. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms occur when an event is detected.
Syntax
rmon event index { [ user user-name ] [ description descript ] [ type {none |
log | notify | log-notify } ] [owner owner-name] }
no rmon event index
Parameter
index —— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
user-name —— The name of the User to which the event belongs, ranging
from 1 to 16 characters. By default, it is "public".
descript —— The description of the event, ranging from 1 to 16 characters. By
default, it is empty.
type —— The event type, with "none", "log", "notify" and "both" options. "None"
indicates no processing, "log" indicates logging the event, "notify" indicates
sending trap messages to the management station, and "both" indicates logging
the event and sending trap messages to the management station.
owner-name — — The owner of the event entry, ranging from 1 to 16
characters. By default, it is "monitor".
Command Mode
Global Configuration Mode
Example
Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the
event as "description1", the type of event as log and the owner of the event as
"owner1":
T3700G-28TQ(config)#rmon event 1-4 user user1 description description1
type log owner owner1
248