Default-Metric; Default-Information Originate - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Redistribute the RIP routes from the external and advertise them as type 1
external routes in the OSPF domain.
T3700G-28TQ(config)# router ospf 1
T3700G-28TQ(config-router)# redistribute rip metric-type 1
default-metric
Description
The default-metric command is used to configure the default cost of the
redistributing external route. To restore to the default value, please use the no
default-metric command.
Syntax
default-metric cost
no default-metric
Parameter
cost —— The default cost of the redistributing external route, ranging form 1 to
16777214. Its default value is 20.
Command Mode
Router Configuration Mode
Example
Configure the default cost of the redistributing external route as 12:
T3700G-28TQ(config)# router ospf 1
T3700G-28TQ(config-router)# default-metric 12
default-information originate
Description
The default-information originate command is used to advertise the default
route as AS-External LSA. To cancel the advertisement of the default route,
please use the no default-information originate command without any
optional parameters. To restore the certain parameters to default values, please
357
Advertisement
Table of Contents
