Lease; Address Hardware-Address - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
network-address —— Specify the network address of the pool, with the format
A.B.C.D. All the IP addresses in the same subnet are allocatable except the
reserved addresses and specific addresses.
subnet-mask —— Specify the subnet mask of the pool, with the format A.B.C.D.
Command Mode
DHCP Configuration Mode
Example
Specify the address pool "product" as 192.168.1.0 255.255.255.0:
T3700G-28TQ(config)# ip dhcp server pool product
T3700G-28TQ(config-dhcp)# network 192.168.1.0 255.255.255.0
lease
Description
The lease command is used to specify the lease time of the address pool.
Syntax
lease lease-time
Parameter
lease-time —— Specify the lease time of the pool, ranging from 1 to 2880
minutes. The default value is 120 minutes.
Command Mode
DHCP Configuration Mode
Example
Specify the lease time of address pool "product" as 10 minutes:
T3700G-28TQ(config)# ip dhcp server pool product
T3700G-28TQ(config-dhcp)# lease 10
address hardware-address
Description
The address hardware-address command is used to reserve the static
address bound with hardware address in the address pool. To delete the binding,
please use no address hardware-address.
288
Advertisement
Table of Contents
