T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
not-advertise——The summary route will not be advertised. If not specified,
the summary route will be advertised.
Command Mode
Router Configuration Mode
Example
Configure the summary route 192.168.0.0/16 which can only be advertised to
the NSSA:
T3700G-28TQ(config)# router ospf 1
T3700G-28TQ(config-router)# summary-address 192.168.0.0 255.255.0.0
nssa-only
maximum-paths
Description
The maximum-paths command is used to configure the maximum number of
the equal-cost multipath routings. To restore to default value, please use the no
maximum-paths command.
Syntax
maximum-paths number
no maximum-paths
Parameter
number ——
ranging from 1 to 32. The default value is 5.
Command Mode
Router Configuration Mode
Example
Configure the maximum number of the equal-cost multipath routings as 2:
T3700G-28TQ(config)# router ospf 1
T3700G-28TQ(config-router)# maximum-paths 2
The maximum number of the equal-cost multipath routings,
355