S-Mirror; Qos-Remark - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Edit the actions for policy1. For the data packets matching ACL 1200 in the
policy, if the rate beyond 1000kbps, they will be discarded by the switch:
T3700G-28TQ(config)#access-list policy action policy1 1200
T3700G-28TQ(config-action)#s-condition rate 1000 osd discard
s-mirror
Description
The s-mirror command is used to configure Stream Mirror function of policy
action to the specified port.
Syntax
s-mirror interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port }
Parameter
port —— The Mirror Port number of Stream Mirror.
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. Specify the mirror port as Gigabit Ethernet port 1/0/2
for the data packets matching ACL 1200:
T3700G-28TQ(config)#access-list policy action policy1 1200
T3700G-28TQ(config-action)#s-mirror interface gigabitEthernet 1/0/2
qos-remark
Description
The qos-remark command is used to configure QoS function of policy action.
Syntax
qos-remark dscp dscp priority priority
no qos-remark
Parameter
dscp —— DSCP of QoS Remark. Specify the DSCP region for the data
packets matching the corresponding ACL. DSCP ranges from 0 to 63. By default,
it is not limited.
202
Advertisement
Table of Contents
