Show Memory-Utilization - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
unitid —— Specify the unit in the stack whose CPU utilization information will
be displayed. If not specified, the CPU utilization information of all the switches
in the stack will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the CPU utilization information of all the switches in the stack:
T3700G-28TQ#show cpu-utilization
show memory-utilization
Description
The show memory-utilization command is used to display the system's
memory utilization in the last 5 seconds/1minute/5minutes.
Syntax
show memory-utilization [ unitid ]
Parameter
unitid —— Specify the unit in the stack whose memory utilization information
will be displayed. If not specified, the memory utilization information of all the
switches in the stack will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the memory utilization information of all the switches in the stack:
T3700G-28TQ#show memory-utilization
164
Advertisement
Table of Contents
