Show Ip Igmp Groups Static; Show Ip Igmp Groups Static Interface - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the dynamic multicast groups on interface VLAN 1:
T3700G-28TQ(config)# show ip igmp groups interface vlan 1
show ip igmp groups static
Description
The show ip igmp groups static command is used to display the information of
all the static multicast groups.
Syntax
show ip igmp groups static [ detail ]
Parameter
detail —— The detailed information of all the static multicast groups.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all the static multicast groups:
T3700G-28TQ(config)# show ip igmp groups static
show ip igmp groups static interface
Description
The show ip igmp groups static interface command is used to display the
information of all the static multicast groups on the specified port.
Syntax
show ip igmp groups static interface { fastEthernet | gigabitEthernet |
ten-gigabitEthernet } port [ detail ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— Specify the port type.
port —— Specify the port number.
316
Advertisement
Table of Contents
