Show Mac Address-Table Address - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
unit--id
vlan-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the total amount of MAC address table in all the units of the stack sorted
by VLAN:
T3700G-28TQ(config)#show mac address-table count
Display the total amount of MAC address table in unit 2 of the stack sorted by
VLAN:
T3700G-28TQ(config)#show mac address-table count unit 2
Display the total amount of MAC address table in VLAN 1 of unit 2 of the stack:
T3700G-28TQ(config)#show mac address-table count unit 2 vlan 1
Display the total amount of MAC address table in VLAN 2 of all the units of the
stack:
T3700G-28TQ(config)#show mac address-table count vlan 2

show mac address-table address

Description
The show mac address-table address command is used to display the
information of a specified MAC address.
Syntax
show mac address-table address mac-addr [ interface { fastEthernet port |
gigabitEthernet port | ten-gigabitEthernet port } ] [ vid vlan-id ]
Parameter
mac-addr —— The specified MAC address.
port
vlan-id
——
Specify the unit-id of the switch in the stack.
——
Specify the VLAN which the switch belongs to.
——
The Fast/Gigabit/ten-Gigabit Ethernet port number.
——
Specify the VLAN which the entry belongs to.
133