Show Ip Igmp Groups Static Interface Vlan; Show Ip Igmp Groups Port-Info (Dynamic) - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
detail —— The detailed information of the static multicast groups.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the detailed information of the static multicast groups on the
gigabitEthernet 1/0/1:
T3700G-28TQ(config)# show ip igmp groups static interface gigabitEthernet
1/0/1 detail
show ip igmp groups static interface vlan
Description
The show ip igmp groups static interface vlan command is used to display
the information of all the dynamic multicast groups on the specified Interface
VLAN.
Syntax
show ip igmp groups static interface vlan vlan-id [ detail ]
Parameter
vlan-id —— Specify the interface VLAN ID.
detail —— The detailed information of the dynamic multicast groups.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the static multicast groups on interface VLAN 1:
T3700G-28TQ(config)# show ip igmp groups static interface vlan 1
show ip igmp groups port-info (dynamic)
Description
The show ip igmp groups port-info command is used to display the
information of the layer 2 forwarding ports of all the dynamic multicast groups or
in the specified VLAN.
317
Advertisement
Table of Contents
