Vrrp Vrid Virtual-Ip; Vrrp Vrid Description - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
vrrp vrid virtual-ip
Description
This command is used to add a virtual IP for the virtual router. Up to 5 IP
addresses can be configured to a virtual router. To delete the corresponding
virtual IP, please use no vrrp vrid virtual-ip command.
Syntax
vrrp vrid vrid virtual-ip virtual-ip
no vrrp vrid vrid virtual-ip virtual-ip
Parameter
vrid —— The virtual router ID.
virtual-ip —— The IP address configured to the virtual router, which must be in
the same subnet with the interface.
Command Mode
Interface Configuration Mode
Example
Add an IP address as 192.168.0.7 for vrid 4 on interface VLAN 3:
T3700G-28TQ(config)#interface vlan 3
T3700G-28TQ(config-if)#vrrp vrid 4 virtual-ip 192.168.0.7
vrrp vrid description
Description
This command is used to configure or modify the description for the virtual
router.
Syntax
vrrp vrid vrid description description
Parameter
vrid —— The virtual router ID.
description ——String to describe the virtual router, which contains 8 characters
at most, composing digits, English letters and under dashes only.
335
Advertisement
Table of Contents
