Access-List Bind(Interface); Access-List Bind(Vlan) - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
priority —— Local Priority of QoS Remark. Specify the local priority for the data
packets matching the corresponding ACL. Local Priority ranges from 0 to 7.
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. For the data packets matching ACL 1200, specify
the DSCP region as 30 and local priority 2:
T3700G-28TQ(config)#access-list policy action policy1 1200
T3700G-28TQ(config-action)# qos-remark dscp 30 priority 2

access-list bind(interface)

Description
The access-list bind command is used to bind a policy to a specified port. To
cancel the bind relation, please use no access-list bind command.
Syntax
access-list bind policy-name
no access-list bind policy-name
Parameter
policy-name —— The name of the policy desired to bind.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Bind policy1 to Gigabit Ethernet port 1/0/2:
T3700G-28TQ(config)#interface gigabitEthernet 1/0/2
T3700G-28TQ(config-if)#access-list bind policy1

access-list bind(vlan)

Description
The access-list bind command is used to bind a policy to a VLAN. To cancel
the bind relation, please use no access-list bind command.
203