TP-Link JetStream T3700G-28TQ Reference Manual page 32

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Password Authentication Mode

1. Open the software to log on to the interface of PuTTY. Enter the IP address of the switch into
Host Name field; keep the default value 22 in the Port field; select SSH as the Connection
type.
2. Click the Open button in the above figure to log on to the switch. Enter the login user name
and password to log on the switch, and the
you can continue to configure the switch.
Figure 1-16 Enable SSH function
Figure 1-17 SSH Connection Config
n enter the Privileged EXEC Mode password, so
13