T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
vrrp vrid track interface
Description
This command is used to add tracked interfaces for the virtual router. To disable
the track function on the specified interface, please use no vrrp vrid track
interface vlan command.
Syntax
vrrp vrid vrid track interface
ten-gigabitEthernet } port | vlan vlan-id } [ reduce-priority pri ]
no vrrp vrid vrid track interface
ten-gigabitEthernet } port | vlan vlan-id }
Parameter
vrid —— The virtual router ID.
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID.
pri —— The priority decrement for the tracking interface. The valid range is 1 –
254. The default value is 10.
Command Mode
Interface Configuration Mode
Example
Configure the tracked interface as vlan2 and the priority decrement as 10 for the
tracking interface:
T3700G-28TQ(config)#interface vlan 3
T3700G-28TQ(config-if)#vrrp
reduce-priority 10
clear vrrp statistics
Description
This command is used to clear all the statistics about vrrp on the switch.
{ { fastEthernet | gigabitEthernet
{ { fastEthernet | gigabitEthernet |
vrid
4
track
339
interface
vlan
vlan2
|