Show Cluster Ndp; Show Cluster Neighbor - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
show cluster ndp
Description
The show cluster ndp command is used to display the NDP information.
Syntax
show cluster ndp [ interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ] ]
Parameter
port —— Specify the Ethernet port number. The NDP information of all ports
will be displayed if the port number is not specified here.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global NDP information of the switch:
T3700G-28TQ(config)#show cluster ndp
Display the NDP information of all the ports of the switch:
T3700G-28TQ(config)#show cluster ndp interface
show cluster neighbor
Description
The show cluster neighbor command is used to display the cluster's neighbor
information.
Syntax
show cluster neighbor
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the cluster's neighbor information:
T3700G-28TQ(config)#show cluster neighbor
274
Advertisement
Table of Contents
