Redistribute - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

redistribute

Description
The redistribute command is used to configure the ASBR to redistribute the
external routes from other routing protocols to the OSPF domain in type-5 LSAs.
To cancel this redistribution, please use the no redistribute command without
any optional parameters. To restore the certain optional parameters to default
values, please use the no redistribute command with corresponding
parameters.
Syntax
redistribute { static | rip | ospf process-id } [ metric cost ] [ metric-type type ]
[ tag tag ] [ nssa-only ]
no redistribute { static | rip | ospf process-id } [ metric cost ] [ metric-type
type ] [ tag tag ] [ nssa-only ]
Parameter
static —— Specify the external route type as static.
rip —— Specify the external route type as RIP.
process-id —— The ospf routing process ID, ranging from 1 to 65535。
cost —— The cost of the external routes, ranging from 1 to 16777214. Its
default value is defined in the command default-metric.
type —— The type of the external routes, either 1 or 2. The default value is 2.
tag —— The identifier of the summary route, which can be used by the routing
strategy to control the advertisement of the routes. It ranges from 0 to
4294967295 and the default value is 0.
nssa-only —— The summary route will only be advertised to the NSSA. If not
specified, the summary route will be advertised to the normal areas and the
NSSA.
Command Mode
Router Configuration Mode
356