Rmon Statistics - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
f-event —— Fall Event, which is the index of the corresponding event which will
be triggered if the sampled value is lower than the Falling Threshold . It ranges
from 1 to 12.
a-type —— Alarm Type, with rise, fall and all options. Rise indicates that the
alarm event will be triggered when the sampled value exceeds the Rising
Threshold , fall indicates that the alarm event will be triggered when the sampled
value is under the Falling Threshold , and all indicates that the alarm event will be
triggered either the sampled value exceeds the Rising Threshold or is under the
Falling Threshold . By default, the Alarm Type is all.
owner-name —— The owner of the entry, ranging from 1 to 16 characters. By
default, it is monitor.
interval —— The alarm interval time, ranging from 10 to 3600 in seconds. By
default, it is 1800.
Command Mode
Global Configuration Mode
Example
Configure rmon alarm entries 1-3 binding with statistics entry 2, the owners as
owner1 and the alarm intervals as 100 seconds:
T3700G-28TQ(config)#rmon alarm 1-3 stats-index 2 owner owner1 interval
100

rmon statistics

Description
The rmon statistics command is used to configure the entries of SNMP-RMON
statistics. To delete the corresponding entry, please use no rmon statistics
command. The maximum supported entries are 1000.
Syntax
rmon statistics index interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port }
valid }]
no rmon statistics index
Parameter
index —— The index number of the statistics entry, ranging from 1 to 65535, in
the format of 1-3,5.
[ owner owner-name] [ status { underCreation |
250