Show Cable-Diagnostics Interface; Show Cpu-Utilization - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Display the system boot configuration information of all the switches in the
stack:
T3700G-28TQ#show boot
show cable-diagnostics interface
Description
The show cable-diagnostics interface command is used to display the cable
diagnostics of the connected Ethernet Port., which facilitates you to check the
connection status of the cable connected to the Switch, locate and diagnose the
trouble spot of the network.
Syntax
show cable-diagnostics interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port }
Parameter
port —— The number of the port which is selected for Cable test.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Show the cable-diagnostics of Gigabit Ethernet port 20:
T3700G-28TQ#show cable-diagnostics interface gigabitEthernet 1/0/20
show cpu-utilization
Description
The show cpu-utilization command is used to display the system's CPU
utilization in the last 5 seconds/1minute/5minutes.
Syntax
show cpu-utilization [ unitid ]
163
Advertisement
Table of Contents
