Show Snmp-Server; Show Snmp-Server View - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
port —— The statistics port number, in the format of 1/0/1.
owner-name — — The creator of the event entry, ranging from 1 to 16
characters. By default, it is "monitor".
status —— The status of the statistics entry, either "underCreation" or "valid".
"underCreation" means this entry won't take effect until it is modified to "valid";
"valid" means this entry takes effect immediately after it is created.
Command Mode
Global Configuration Mode
Example
Configure the statistics entries 1-3 with the statistics port as 1/0/1, owner as
owner1 and status as valid:
T3700G-28TQ(config)#rmon statistics 1-3 interface gigabitEthernet 1/0/1
owner owner1 status valid
show snmp-server
Description
The show snmp-server command is used to display SNMP configuration
globally.
Syntax
show snmp-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display SNMP configuration globally:
T3700G-28TQ#show snmp-server
show snmp-server view
Description
The show snmp-server view command is used to display the View table.
Syntax
show snmp-server view
251
Advertisement
Table of Contents
