T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 1
1.1 Accessing the CLI
You can log on to the switch and access the CLI by the following two methods:
1.
Log on to the switch by the console port on the switch.
2.
Log on to the switch remotely by a Telnet or SSH connection through an Ethernet port.
1.1.1 Logon by a console port
To log on to the switch by the console port on the switch, please take the following steps:
1.
Connect the PCs or Terminals to the console port on the switch by a provided cable.
2.
Click Start → All Programs → Accessories→ Communications → Hyper Terminal to
open the Hyper Terminal as the Figure 1-1 shown.
3.
The Connection Description Window will prompt as Figure 1-2 shown. Enter a name into
the Name field and click OK.
Using the CLI
Figure 1-1 Open Hyper Terminal
5