Password; Login - TP-Link JetStream T3700G-28TQ Reference Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Enter the Virtual Terminal configuration mode so as to prepare further
configurations such as password and login mode for virtual terminal 0 to 5:
T3700G-28TQ(config)#line vty 0 5
password
Description
The password command is used to configure the connection password. To
clear the password, please use no password command.
Syntax
password password
no password
Parameter
password —— Configure the connection password, which contains 16
characters at most, composing digits, English letters and under dashes only.
Command Mode
Line Configuration Mode
Example
Configure the connection password of Console port connection 0 as "tplink":
T3700G-28TQ(config)#line console 0
T3700G-28TQ(config-line)#password tplink
Configure the connection password of virtual terminal connection 0-5 as "tplink":
T3700G-28TQ(config)#line vty 0 5
T3700G-28TQ(config-line)#password tplink
login
Description
The login command is used to configure the login mode of a switch which uses
connection password to login. At this situation, a connection password must be
set for virtual terminal connection.
77
Advertisement
Table of Contents
