T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode
Example
Shut down the routed port 1/0/9 :
T3700G-28TQ(config)# interface gigabitEthernet 1/0/9
T3700G-28TQ(config-if)# no switchport
T3700G-28TQ(config-if)# shutdown
description
Description
This description command is used to add a description to the Layer 3 interface,
including routed port, loopback interface and VLAN interface. To clear the
description of the corresponding interface, please use the no description
command.
Syntax
description string
no description
Parameter
string —— Content of an interface description, ranging from 1 to 32 characters.
Command Mode
Interface Configuration Mode
Example
Add a description system-if to the routed port 1/0/9 :
T3700G-28TQ(config)# interface gigabitEthernet 1/0/9
T3700G-28TQ(config-if)# no switchport
T3700G-28TQ(config-if)# description system-if
ip route
Description
This ip route command is configure the static route. To clear the corresponding
entry, please use the no ip route command.
279