1.1.2 Configuring The Privileged Exec Mode Password - TP-Link JetStream T3700G-28TQ Reference Manual

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
6. The DOS prompt "T3700G-28TQ>" will appear after pressing the Enter button as Figure
1-5 shown. It indicates that you can use the CLI now.

1.1.2 Configuring the Privileged EXEC Mode Password

To configure the switch remotely by a Telnet or SSH connection, please set a password for
entering the Privileged EXEC Mode through the console connection first. Follow the steps in
Logon by a console port
configure the Privileged EXEC Mode password.
Figure 1-4 Port Settings
Figure 1-5 Log in the Switch
to log on to the switch, and then follow the steps shown in Figure 1-6 to
7
1.1.1