Show Mpls Traffic-Eng Interface - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (MPLS)
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
114 Confidential and Proprietary Information of ZTE CORPORATION
show mpls traffic-eng
interface
Use this command to display information about interfaces where
RSVP traffic engineering is enbaled.
All mods except user EXEC
show mpls traffic-eng interface [<interface-name >]
interface
<interface-name >
All the interfaces with RSVP traffic engineering function will be dis-
played by default.
This command is supported after the platform version 4.6.02.
1. This example displays information about interfaces where
RSVP traffic engineering is enabled.
ZXR10#show mpls traffic-eng interface
I/F TE Hello interval(ms) misses BK-PATH i/f
flow max(kpbs)
fei_1/1 YES NO
fei_1/2 YES NO
fei_1/4 YES YES
The descriptions of the displayed information are shown below.
Field
I/F
TE
Hello
Interval
misses
BK-PATH
i/f max
flow max
Shows information about a interface where
RSVP traffic engineering is enabled
Locally configured interface with RSVP traffic
engineering function
100 4 NO
100 4 NO
100 4 TUL3
Description
RSVP TE interface
Whether the interface has RSVP TE function
Whether the interface has RSVP hello
function
Time interval for the interface to send the
RSVP hello requests
Specifies how many Hello acknowledgments
a node can miss in a row before the node
considers communication with its neighbor
is down
Whether the interface is configured with
backup tunnel
Maximal bandwidth of the interface
supporting traffic engineering
Maximal bandwidth of traffic engineering
flow passing through the interface
max(kpbs)
75000 75000
75000 75000
75000 75000