Show Mpls Ldp Dampening Summary - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
information
Example
Field
Assigned in labels
Learned out labels
show mpls ldp dampening
summary
Use this command to show the suppressed LSP in the current LDP
flapping routes.
User EXEC and privileged EXEC
show mpls ldp dampening summary [<ip-address><net-mas
k>]
<ip-address>
<net-mask>
If there is not any parameter after this command , all information
about LSP in LDP flapping routes is displayed. If there is a parame-
ter after this command, the dampening information of current LSP
is displayed.
This example describes how to display information about LDP dis-
covery.
ZXR10#show mpls ldp dampening summary
Damp LSPS of ldp:
status codes: d damped
InLable OutLable Network
Reuse Penalty
d 17 3 25.25.25.25/32 20.1.1.25 25.25.25.25:0
00:00:01 1729
The displayed field descriptions are shown below.
Field
d
InLable
OutLable
Network
From
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 MPLS LDP Configuration
Description
Number of incoming label prefixes assigned
by LDP
Number of outgoing label prefixes learned
by LDP
Network IP address related to the dampening
information, in the dotted decimal format
Network mask, in the dotted decimal format
NH From
Description
The LSP is suppressed
Ingress label
Egress Label
NetworkIP address and mask length of LSP
LDP Router identifier of the remote neighbor
39