Show Vfi - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (MPLS)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
68 Confidential and Proprietary Information of ZTE CORPORATION
show mpls l2transport vc vpls

show vfi

Use this command to show detailed information about some virtual
forwarding instance (VFI).
User EXEC and privileged EXEC
show vfi <vfi-name>
<vfi-name>
This command is provided only for ZXR10 GER, ZXR10 T64E/T128,
and ZXR10 6900/8900.
This example describes how to show detailed information of a VPLS
virtual forwarding instance (VFI).
ZXR10(config)#show vfi aa
Flag: (spoke) Spoke type PW
(tunnelId:X) Get outer label from MPLSTE tunnel and X is
tunnel ID
Vfi name: aa VCID: 10
Enable
Local attachment circuit:
fei_3/1.1
Vlan id: 1
Neighbors connected via pseudowires:
15.15.15.15
The displayed field descriptions are shown below.
Field
spoke
tunnelId:X
Vfi name
Local attachment
circuit
Vlan id
Vlan range
Neighbors connected
via pseudowires
Designated virtual forwarding instance (VFI)
name in VPLS
PwType: Ethernet StpTunnel: Stp
Description
Topology type is spoke
The outer tunnel encapsulation type is
RSVPTE, X indicates the corresponding tunnel
identifier
Virtual forwarding instance (VFI) name
Circuit interfaces locally bounded
VLAN identifier of the interface in the
Ethernet-vlan instance
VLAN range of the interface in the Ethernet
instance
Indicates that those PEs are in adjacency
relations with local instance