Vfi Mspw; Vpls Mac-Filter - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (MPLS)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
72 Confidential and Proprietary Information of ZTE CORPORATION
This example describes how to configure a name for the VPLS in-
stance on the PE.
ZXR10(config)#vfi vfi1
ZXR10(config-vfi)#
no vfi
vid
pwtype
peer
no peer

vfi mspw

Use this command to configure the multi-hop static pseudo wire
(PW) S-PE.
Global configuration
vfi mspw <vfi-name>
no vfi mspw <vfi-name>
<vfi-name>
� This command is supported after the platform version 4.8.02.
� MSPW VFI is a configuration on PE router, which acts as S-PE
node to implement multi-hop static PW forwarding. This con-
figuration allows the configuration instance to act as a forward-
ing relaying node of the static multi-hop pseudo wire (PW). Use
this command to enter VFI MSPW configuration mode.
This example describes how to configure static multi-hop pseudo
wire (PW) forwarding relaying on the PE.
ZXR10(config)#vfi mspw vfi1
ZXR10(config-vfi-mspw)#
no vfi mspw
pwtype
peer
no peer

vpls mac-filter

Use this command to create a VPLS MAC filter rule, including the
entries. Delete the VPLS MAC filter rule with the no form of this
command.
Global configuration
S-PE MSPW VFI name