Purpose
Command Modes
Syntax
Instructions
Purpose
Command Modes
6
C h a p t e r
FRR Configuration
Table of Contents
ip rsvp signalling hello
Use this command to enable RSVP hello messages in global con-
figuration and interface configuration mode.
Global configuration, interface configuration
ip rsvp signalling hello
no ip rsvp signalling hello
�
This command id supported after the platform version 4.6.02.
�
To enable the router to support RSVP hello messages, this com-
mand must be configured in global configuration mode, and
this command must be enabled on the related interface at the
same time. After this command is enabled, the interface sends
RSVP hello messages to its neighbor at regular time and re-
ceives the return message from the neighbor to detect its life-
time state.
ip rsvp signalling hello
refresh interval
Use this command to configure the time interval for the interface
to send RSVP hello requests.
Interface configuration
Confidential and Proprietary Information of ZTE CORPORATION
109