ZXR10 8900 Series Command Reference (MPLS)
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
104
Confidential and Proprietary Information of ZTE CORPORATION
tunnel mpls traffic-eng autoroute metric {<value>| absolute
<value>| relative <value>}
no tunnel mpls traffic-eng autoroute metric
<value>
absolute <value>
relative <value>
The default metric type is IGP. The default metric value is IGP met-
ric value.
This command is supported after the platform version 4.8.20.
1. This example describes how to configure the metric value of
automatic routes as 2.
ZXR10(config)#interface tunnel5
ZXR10(config-if)# tunnel mpls traffic-eng autoroute metric 2
ZXR10(config-if)# tunnel mpls traffic-eng autoroute metric
absolute 2
ZXR10(config-if)# tunnel mpls traffic-eng autoroute metric
relative -2
2. This example describes how to configure the metric type as
absolute metric, and the metric value is 2.
ZXR10(config)#interface tunnel5
ZXR10(config-if)# tunnel mpls traffic-eng autoroute metric
absolute 2
3. This exmaple describes how to configure the metric type as
relative metric, and the metric value is -2.
ZXR10(config)#interface tunnel5
ZXR10(config-if)# tunnel mpls traffic-eng autoroute metric
relative -2
tunnel mpls traffic-eng
bandwidth
Use this command to configure the bandwidth reserved for estab-
lishing a tunnel on the tunnel interface. Restore default with the
no form of this command.
Interface configuration
tunnel mpls traffic-eng bandwidth <bandwidth>
no tunnel mpls traffic-eng bandwidth
<bandwidth>
There is no bandwidth reserved for establishing a tunnel.
Absolute metric value, range: 1~4294967295
Absolute metric value of the absolute metric
type, range: 1~4294967295
Metric value relative to IGP of the relative
metric style, range: -10~10
Bandwidth reserved for the traffic engineering
tunnel, unit: kbps, range: 0~4294967295