Show Ip Rsvp Authentication - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (MPLS)
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
94 Confidential and Proprietary Information of ZTE CORPORATION

show ip rsvp authentication

Use this command to show the status and configuration informa-
tion of all security assistants (SAs) or some neighbor.
All modes except User EXEC
show ip rsvp authentication [<A.B.C.D >]
<A.B.C.D>
The information of all security assistants (SAs) is displayed by de-
fault.
This command is supported after the platform version 4.8.21.
The following contents will be shown after using this command.
ZXR10#show ip rsvp authentication
Neighbor: 10.10.10.2
Interface: fei_1/1
Direction: Send
Expiration: 00:03:59
Last valid seq # sent:
Windowsize: 5
Integriy HF flag: Set
Neighbor: 10.10.10.2
Interface: fei_1/1
Direction: Receive
Expiration: 00:03:31
Last valid seq # rcvd:
Challenge: Configured
Windowsize: 5
Integriy HF flag: Set
Sequence window:
0x1e2868f0b
0x1e2868f0c
0x1e2868f0d
0x1e2868f0e
The descriptions of the displayed information are shown below.
Field
Interface
Direction
Expiration
Last valid seq
Challenge
Windowsize
Integriy HFflag
Sequence window
Neighbor address
Key ID (hex): 0a0a0a010000
0x1e286cb10
Key ID (hex): 0a0a0a020000
0x1e2868f0e
Description
Corresponding interface name of the SA
Direction of the SA (send or receive)
Expiration time of the SA
Latest valid sequence
Whether passes the challenge negotiation
SA window size
Whether supports the challenge
Valid sequence group