Ip Rsvp Authentication Key Passphrase; Ip Rsvp Authentication Type - Zte ZXR10 8900 Series Command Reference Manual

Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
� This command is an optional command for configuring the life-
time of the password of the RSVP authentication on the inter-
face. Each interface supports the lifetime of security assistant
(SA). If the SA is not used during the lifetime, it will not be
deleted. If the SA is used during the lifetime, it will be re-
served.
� This command is supported after the platform version 4.8.21.
This example describes how to configure the lifetime of the au-
thentication key as 5 seconds.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip rsvp authentication lifetime 5
ip rsvp authentication key
passphrase
Use this command to configure RSVP authentication key on the
interface. Clear this configuration with the no form of this com-
mand.
Interface configuration
ip rsvp authentication key passphrase <passphrase>
no ip rsvp authentication key passphrase
<passphrase>
The interface adopts "rsvpteauth" as the key by default.
� This command is an optional command.
� This command is supported after the platform version 4.8.21.
This example describes how to configure the RSVP authentication
key as zxr102008.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip rsvp authentication key passphrase zxr102008

ip rsvp authentication type

Use this command to configure RSVP authentication type (MD5 or
SHA1). Restore the default type MD5 with the no form of this
command.
Interface configuration
ip rsvp authentication type {md5 | sha1}
no ip rsvp authentication type
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MPLS Traffic Engineering Configuration
Authentication key configured by user, 8~40
characters
81