Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Remote interface description:
Sequencing: receive disabled, send disabled
Local interface: VFI 1 up
Destination address: 6.6.6.6, VC ID: 1, VC status: up
Tunnel label:
Output interface: fei_3/6, imposed label stack { 50016, 50017 }
Create time: 00:00:18, last status change time: 00:00:18
Signalling protocol: LDP, peer 6.6.6.6 : 0, up
MPLS VC labels:
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
The displayed field descriptions are shown below.
Field
VFIName
LocalCircuit
DestAddress
VC ID
Status
show mpls l2transport vpn summary
show mpls l2transport vpn
summary
Use this command to show the number of VPWSs and VPLSs in the
L2VPN.
User EXEC and privileged EXEC
show mpls l2transport vpn summary
This command is supported after the platform version 4.6.02.
This example describes how to show the number of L2VPNs con-
figured on the router.
ZXR10#show mpls l2transport vpn summary
The summary information about configured l2 vpn:
vpn_type
vpws
vpls
Confidential and Proprietary Information of ZTE CORPORATION
local 2517, remote 50017
Description
VFI name
Local link type, it indicates the L2VPN VPLS
in this example
Remote destination address
VC identifier
VC status of the VPLS
current/max
0/1501
3/4096
Chapter 4 VPLS Configuration
67