Ip Rsvp Signalling Refresh Interval (Global Configuration) - Zte ZXR10 8900 Series Command Reference Manual

Syntax
Syntax
Description
Defaults
Example
Command
Function
Command Modes
Command format
Parameter
Description
Example
ip rsvp signalling hello graceful-restart timers restart-time
<time>
no ip rsvp signalling hello graceful-restart timers restart-t
ime
<time>
The default value is 120000 milliseconds.
This example describes how to configure the restart time of the
MPLS traffic engineering (TE) graceful restart (GR) as 30000 mil-
liseconds.
ZXR10(config)#ip rsvp signalling hello graceful-restart
timers restart-time 30000
ip rsvp signalling
refresh interval (Global
Configuration)
This command is used to configure the interval of sending refresh
packets. By executing command no, default interval is reset.
Global configuration mode
ip rsvp signalling refresh interval <interval-value>
no ip rsvp signalling refresh interval
Parameter
<interval-value>
To configure the interval of MPLS traffic engineering sending re-
fresh packets to 60000 milliseconds, execute the following com-
mand:
ZXR10(config)#ip rsvp signaling refresh interval 60000
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MPLS Traffic Engineering Configuration
Restart time of the graceful restart (GR) in
milliseconds, range: 0~30000
Description
This is the interval of sending refresh
packets, in milliseconds, 30000 milliseconds
(30 seconds) by default, in range of
5000~65535000.
87