Show Mpls Ldp Discovery - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Example
Field
Flaps
Duration
Reuse
Penalty

show mpls ldp discovery

Use this command to show information about LDP discovery .
User EXEC and privileged EXEC
show mpls ldp discovery [detail]
detail
This example describes how to show information about LDP dis-
covery .
ZXR10#show mpls ldp discovery
Local LDP Identifier:
95.95.95.95:0
Discovery Sources:
Interfaces:
fei_5/1 (ldp): xmit/recv
LDP Id: 93.93.93.93:0; IP addr: 95.93.5.93
fei_6/1 (ldp): xmit/recv
LDP Id: 98.98.98.98:0; IP addr: 95.98.6.98
The displayed field descriptions are shown below.
Field
Local LDP Identifier
Interface
Xmit
Recv
Src IP addr
Transport IP addr
IP addr
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 MPLS LDP Configuration
Description
Flapping time of current lsp
Time from the first time to drop packets until
now
Time from the last time to receive packets
until now
Penalty value, values of LSP reuse and
suppression are decided by this value
Shows the detailed information of the
discovered neighbor
Description
Local LDP identifier
List of interfaces acting the LDP discovery
Indicates that the interface is sending hello
message
Indicates that the interface is receiving hello
message
Source address of hello messages sent from
neighbors
Transmission address of the TCP connection
indicated by neighbor
Transmission address of the TCP connection
indicated by neighbor
41