Purpose
Command Modes
Syntax
Defaults
Instructions
2. This example displays information about the interface fei_1/4
where RSVP traffic engineering is enabled.
ZXR10#show mpls traffic-eng interface fei_1/4
I/F
TE
Hello intervalms)misses BK-PATH
flow max(kpbs)
fei_1/4 YES YES
tunnel mpls traffic-eng
fast-reroute
Use this command to configure the tunnel to support Fast ReRoute
(FRR).
Interface configuration
tunnel mpls traffic-eng fast-reroute
no tunnel mpls traffic-eng fast-reroute
The tunnel does not support Fast ReRoute (FRR) by default.
�
This command is supported after the platform version 4.6.02.
�
The tunnel supports Fast ReRoute (FRR) and informs the down-
stream node that it needs local protection. The downstream
node tries its best to offer local protection and sends related
information to the head node if local protection is available.
Confidential and Proprietary Information of ZTE CORPORATION
100
4
TUL3
Chapter 6 FRR Configuration
i/f max(kpbs)
75000
75000
115