Show Mpls Traffic-Eng Interface Packet-Counter - Zte ZXR10 8900 Series Command Reference Manual

Example
Command
Function
Command Modes
The following contents will be shown after using this command.
(The data below are for reference only):
ZXR10#show mpls traffic-eng interface detail fei_1/1
fei_1/1:
Bandwidth:
Curr allocated: 0K bits/sec
Max. allowed (total): 75000K bits/sec
Max. allowed (per flow): 75000K bits/sec
Authentication: enabled
Key: <encrypted>
Type: md5
Challenge: enabled
Challenge-imp:
Window size: 5
Lifetime: 300
BFD:enable disconnected
frr_counter: 0
out_lsp_counter:
in_lsp_counter:
The descriptions of the displayed information are shown below.
Field
Bandwidth
Authentication
Key
Type
Challenge
Challenge-imp
Window size
Lifetime
BFD
frr_counter
out_lsp_counter
in_lsp_counter
show mpls traffic-eng
interface packet-counter
This shows detailed information about the number of RSVP packets
on interface.
All modes except user mode
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MPLS Traffic Engineering Configuration
Implemented
down unprotected
0
0
Description
Current bandwidth
Whether authentication is enabled on the
interface
Authentication key on the interface
Authentication type
Authentication receiver supporting challenge
Authentication sender supporting challenge
Authentication window size
SA lifetime of the authentication
BFD state
FRR number
Number of LSPs which take the interface as
the outgoing interface
Number of LSPs which take the interface as
the incoming interface
99