Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Instructions
Example
show ip explicit-path
Use this command to show detailed information about the explicit
path.
All modes except user EXEC
show ip explicit-path [name <name>| identifier <identifier>]
name <name>
identifier <identifi
er>
This command is used to show detailed information about the ex-
plicit path. If the router does not support MPLS traffic engineering,
there is no such information displayed.
The following contents will be shown after using this command.
(The data below are for reference only):
ZXR10#show ip explicit-path
PATH namepath_123
1. next-address 192.1.1.1 strict
2. next-address 1.1.1.1 loose
PATH identifier 123
1. next-address 10.40.88.36 strict
2. next-address 3.2.1.6 loose
ZXR10#show ip explicit-path name path_123
PATH namepath_123
1. next-address 192.1.1.1 strict
2. next-address 1.1.1.1 loose
The descriptions of the displayed information are shown below.
Field
PATH
1. next-address
2. next-address
show ip rsvp hello
graceful-restart
Use this command to show detailed information about the RSVP
Graceful Restart HELLO instance.
All modes except user EXEC
show ip rsvp hello graceful-restart
This command is supported after the platform version 4.8.01.
The following contents will be shown after using this command.
ZXR10#show ip rsvp hello graceful-restart
Graceful Restart: Enabled
Refresh interval: 10000 msecs
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MPLS Traffic Engineering Configuration
Path name
Path identifier, range: 1~65535
Description
Name of the path or number of flags
First IP address in the path
Second IP address in the path
95