Vpls Apply-Mac-Filter; Vfi - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions

vpls apply-mac-filter

Use this command to apply MAC filter rule to a virtual forwarding
instance (VFI) on the PE.
VFI configuration
vpls apply-mac-filter <rule_number> global
no vpls apply-mac-filter <rule_number> global
<rule_number>
global
� This command is supported after the platform version 4.8.02.
�
Use this command to apply VPLS MAC filtering.
This example describes how to apply MAC filter rule to a virtual
forwarding instance (VFI) member on the PE.
ZXR10(config)#vfi vfi1
ZXR10(config-vfi)#vpls apply-mac-filter 1 global
no vfi
vcid
pwtype
peer
no peer
vpls mac-filter

vfi

Use this command to create a VPLS instance on the PE. Delete the
VPLS instance with the no form of this command.
Global configuration
vfi <vfi-name>
no vfi <vfi-name>
<vfi-name>
� This command is supported after the platform version 4.6.02.
� A virtual forwarding instance (VFI) is a VPLS instance on the PE
router. The virtual forwarding instances (VFIs) with the same
virtual channel identifier (VCID) on different PEs belong to the
same VPLS and they can communicate with each other. After
this command is executed, enter the VFI configuration mode.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 VPLS Configuration
MAC filter rule number
All members of this virtual forwarding
instance (VFI) are valid
Virtual forwarding instance (VFI), namely the
name of L2 VPN
71