Zte ZXR10 8900 Series Command Reference Manual page 111

Field
DOWN IF
STATE/PROT
This example shows information about the tunnel namedtunnel11.
ZXR10#show mpls traffic-eng tunnels tunnel11
name: tunnel_11
Status:
Admin: up Oper: up
Path option: 11, type explicit pos_412
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 0
Metric Type: IGP (default)
InLabel:-
OutLabel:pos_5/1,16
RSVP Signalling Info :
src 4.4.4.4 , Dst 2.2.2.2, Tun_Id 11, Tun_Instance 6
RSVP Path Info:
Explicit Route: 67.1.1.2 67.1.1.1 66.1.1.1 66.1.1.2 2.2.2.2
Record Route: NONE
Tspec:ave rate= 0 kbits, burst= 8000 bytes,
peak rate = 0 kbits
RSVP Resv Info:
Record Route:
Fspec:ave rate= 0 kbits, burst= 8000 bytes,
peak rate = 0 kbits
History:
Tunnel:
Time since created: 0 days, 5 hours, 17 minutes
Prior LSP:0
Current LSP: Uptime:0 days, 5 hours, 16 minutes
The descriptions of the displayed information are shown below.
Field
Name
Destination
Admin
Oper
Path
Signalling
Path option
Bandwidth
Priority
Affinity
Fast-reroute
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MPLS Traffic Engineering Configuration
Description
Downlink interface of the tunnel
Tunnel administration/running state
(Tunnel11) Destination: 2.2.2.2
Path: valid Signalling: connected
Fast-reroute: enable
NONE
Description
Tunnel name
Destination address of the tunnel
Tunnel administration state: up/down/Admin-
down (tunnel interface is shutdown)
Tunnel running state: up/down
Tunnel path state: valid/invalid
Tunnel signalling state: down/connected/sig-
nalling
Explicit path configuration
Reserved tunnel bandwidth
Priority for establishing and holding the tunnel
Tunnel affinity
Whether the tunnel supports fast reroute:
enable/disable
0 Affinity: 0x0/0x0
101