Configuring Web Settings; Changing The Administrator Interface Web Server Port; Enabling Https - RADVision SCOPIA 400 User Manual

Configuring Web Settings

C W
ONFIGURING
S
ETTINGS
C
HANGING THE
A
DMINISTRATOR
I W
NTERFACE EB
S P
ERVER ORT
E HTTPS
NABLING
70 SCOPIA 400/1000 Gateway User Guide
EB
On the Web tab, you can set the web server port and configure enhanced web
security settings.
This section describes the following topics:

Changing the Administrator Interface Web Server Port

Enabling HTTPS

Managing Digital Certificates
Port 80 is the default Administrator interface web server port. For additional
security, you can modify the web server port in the Web tab.
Procedure
In the Gateway interface, on the sidebar, click Board.
1
Click the Web tab.
2
3 In the Web server port field, enter the port number.
4 On the toolbar, click Upload.
This section describes how to enable or disable Gateway HTTPS support.
Note HTTPS support is enabled when a certificate is installed or a certificate is
self-signed.
Procedure
1 In the Gateway interface, on the sidebar, click Board.
2 Click the Web tab.
Check Support Secure Communications (HTTPS) to enable HTTPS
3
support. Uncheck it to disable HTTPS.
Click Upload.
4
on page 70
on page 71
on page 70