About Scopia Gateway Applications And Topologies - RADVision SCOPIA 400 User Manual

Version 5.6
Hide thumbs Also See for SCOPIA 400:
Table of Contents

Advertisement

Table 1-2
Gateway Feature Specifics (continued)
Feature
Encryption interoperability
PRI interface
Switch information
Bonding calls
Internal IVR capacity
A
SCOPIA
BOUT
G
ATEWAY
A
PPLICATIONS AND
T
OPOLOGIES
Gateway P20 SP
N/A
Configurable E1/T1 PRI network interface.
Support for fractional E1/T1 channel
selection.
Configurable as terminal side (TE) or
network side (NT) device.
Configurable Long Haul PRI module
(supported in Japan only).
Numbering Plan Identifier (NPI), Type of
Number (TON) and Network Specific
Facility (NSF) information elements are
configurable per PRI port.
Internal Imux providing calls at 128 Kbps
(2B) up to full PRI of 1472 Kbps (23B) for
T1 and up to full PRI of 1920 Kbps (30B) for
E1 using bonding mode 1.
Parallel dialing for bonded calls.
30 simultaneous calls
The SCOPIA Gateway supports multimedia conferencing by translating
between H.323 and H.320 protocols. Examples of network applications that use
the Gateway include:
Multimedia conferencing (see
page 8)
Point-to-Point conferencing (see
on page 9)
Multipoint conferencing (see
page 9)
IP networking (see
page 10)
ISDN networking (see
on page 10)

About SCOPIA Gateway Applications and Topologies

Gateway S40 SP
KIV-7, KG-194
N/A
N/A
N/A
4 simultaneous calls
About Multimedia Conferencing
About Point-to-Point Conferencing
About Multipoint Conferencing
About Gateway IP Network Connections
About Gateway ISDN Network Connections
on
on
on
Functionality
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scopia 1000

Table of Contents