About Gateway Interface Users; Adding Gateway Interface Users; Editing Gateway Interface Users - RADVision SCOPIA 400 User Manual

About Gateway Interface Users

A G
BOUT ATEWAY
I U
NTERFACE SERS
A G
DDING ATEWAY
I U
NTERFACE SERS
E G
DITING ATEWAY
I U
NTERFACE SERS
62 SCOPIA 400/1000 Gateway User Guide
Users must have the appropriate access level to log in to the Gateway interface.
With Administrator-level access, a user can configure the Gateway and monitor
Gateway activity. You can view and manage the list of Gateway users in the
Users tab of the Board section of the Gateway interface. The Users tab displays
all currently configured users and their access levels.
There are three types of Gateway interface users:
Administrator—Full access to the Gateway interface to configure
Gateway settings.
Operator—User can monitor or disconnect calls but otherwise only has
read-only access to the Gateway interface.
Read-only—User has read-only access to the Gateway interface.
In the Users tab of the Board section of the Gateway interface, you can add
Gateway interface users.
Procedure
1 In the Gateway interface, on the sidebar, click Board.
2 Click the Users tab.
Click Add to add a new user.
3
The Add User dialog box appears.
In the User name field, enter the user login name.
4
In the Access Level field, choose one of the following access levels:
5
Administrator, Operator or Read only.
In the Password field, enter the password that the user uses to login to
6
the Gateway interface.
7 In the Confirm Password field, re-enter the password.
8 Click Upload.
In the Users tab of the Board section of the Gateway interface, you can edit
Gateway interface users.
Procedure
In the Gateway interface, on the sidebar, click Board.
1
Click the Users tab.
2